Track Your Order
demo@gmail.com
Special up to 60% Off all item
Accessories
Managers of data centers offering collocation and cloud services sign contracts guaranteeing 100% up-time. Most engineering types would say that's impossible; however, that kind of guarantee is the cost of doing business in today's market. If the service is anything less than 100%, clients get substantive refunds, and the data center loses credibility.
That could explain why data-center operators will spend millions of dollars on backup power-generation equipment, which more often than not amounts to diesel generator sets similar to the Cummins model pictured above.
To learn more about how these monsters work, I contacted the Cummings Power-Generation Business Unit, which is the division that builds generator sets of all sizes, from Oman RV models on up. At the division headquarters in Minnesota I met Richard Hallahan, Technical Marketing Manager for Data Centers and a certified professional engineer, and he ushered me into a high-tech conference room and asked how he could help.
Check accessories tab to add a hard drive. Viewtech will install the hard drive and power up the NVR before dispatch.
The Dahua 32CH NVR offer an unbelievable incoming bandwidth of 320Mbps. This unit has 4 HDD bays allowing total storage of 24TB.
H.264 & H.265 Recording
This NVR is compatible with both H.264 and H.265 streams.
Built in PoE Switch
This NVR offers a built in 16 port PoE switches. Dahua cameras can be simply plugged into any built in POE port and the camera will automatically install itself.
Dual HDMI Outputs
One primary / replay output and one programmable output for spot monitors. The programmable output can be fully programmed with a number of different cycling and matrix functions.
Plug & Play
This NVR offers a built in 16 port PoE switch. Dahua cameras can be simply plugged into any built in POE port and the camera will automatically install itself.
The remaining 16 cameras can be installed via an external switch.
Advanced Motion Detection
Multi-region maskable motion detection allows complete customisation of motion activated recording. Both sensitivity and threshold can be adjusted.
Web Interface
The easy to use web interface is fast and intuitive. Features likes video settings, SD card record and playback control, network information, motion detection as well as hundreds of other settings can all be done from here.
Mobile Phone Support
All Dahua cameras and NVRs feature fully featured mobile apps. These are supported for iPhone and Android. Features include live view, playback, alarm monitoring, status monitoring, full remote setup and push alerts. Push alerts send notifications straight to your phone regarding motion detect or other alarms.
Specifications
| Details | |
|---|---|
| Product code | RB2011UiAS-2HnD-IN |
| Architecture | MIPSBE |
| CPU | AR9344 |
| CPU core count | 1 |
| CPU nominal frequency | 600 MHz |
| Dimensions | 214mm x 86mm for PCB |
| License level | 5 |
| Operating System | RouterOS |
| Size of RAM | 128 MB |
| Storage size | 128 MB |
| Storage type | NAND |
| Tested ambient temperature | -35C to +65C |
| Suggested price | $129.00 |
Powering
| Details | |
|---|---|
| Max Power consumption | 11W |
| PoE in | Passive PoE |
| PoE out | Passive PoE |
| PoE in input Voltage | 8-30 V |
| Number of DC inputs | 2 (DC jack, PoE-IN) |
| DC jack input Voltage | 8-30 V |
Wireless
| Details | |
|---|---|
| Wireless 2.4 GHz number of chains | 2 |
| Wireless 2.4 GHz standards | 802.11b/g/n |
| Antenna gain dBi for 2.4 GHz | 4 |
| Wireless 2.4 GHz chip model | AR9344 |
Ethernet
| Details | |
|---|---|
| 10/100 Ethernet ports | 5 |
| 10/100/1000 Ethernet ports | 5 |
Fiber
| Details | |
|---|---|
| SFP DDMI | Yes |
| SFP ports | 1 |
Peripherals
| Details | |
|---|---|
| Serial port | RJ45 |
| Number of USB ports | 1 |
| USB Power Reset | Yes |
| USB slot type | USB type A |
| Max USB current (A) | 1 |
Other
| Details | |
|---|---|
| PCB temperature monitor | Yes |
| Voltage Monitor | Yes |
Wireless specifications
| 2.4 GHz | Transmit (dBm) | Receive Sensitivity |
|---|---|---|
| 1MBit/s | 30 | -96 |
| 11MBit/s | 28 | -80 |
| 6MBit/s | 30 | -96 |
| 54MBit/s | 27 | -80 |
| MCS0 | 30 | -92 |
| MCS7 | 25 | -73 |
hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.
It also supports passive PoE input and passive or 802.3af/at PoE output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power at/af mode B (4,5+)(7,8-) compatible devices, if 48-57 input voltage is used.
Specifications
| Details | |
|---|---|
| Product code | RB750r2 |
| Architecture | MIPSBE |
| CPU | QCA9533 |
| CPU core count | 1 |
| CPU nominal frequency | 850 MHz |
| Dimensions | 113x89x28mm. Weight without packaging and cables: 129g |
| License level | 4 |
| Operating System | RouterOS |
| Size of RAM | 64 MB |
| Storage size | 16 MB |
| Storage type | FLASH |
| Tested ambient temperature | -20C to +70C |
Powering
| Details | |
|---|---|
| Max Power consumption | 2W |
| PoE in | Passive PoE |
| PoE in input Voltage | 6-30 V |
| Number of DC inputs | 2 (DC jack, PoE-IN) |
| DC jack input Voltage | 6-30 V |
Ethernet
| Details | |
|---|---|
| 10/100 Ethernet ports | 5 |
hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.
It also supports passive PoE input and passive or 802.3af/at PoE output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power at/af mode B (4,5+)(7,8-) compatible devices, if 48-57 input voltage is used.
Specifications
| Details | |
|---|---|
| Product code | RB951Ui 2HnD |
| Architecture | MIPSBE |
| CPU | QCA9557 |
| CPU core count | 1 |
| CPU nominal frequency | 800 MHz |
| License level | 4 |
| Size of RAM | 128 MB |
| Storage size | 16 MB |
| Storage type | FLASH |
| Tested ambient temperature | -40 + 70 C |
Powering
| Details | |
|---|---|
| Max Power consumption | 9W |
| PoE in | Passive PoE |
| PoE out | 802.3af/at |
| PoE in input Voltage | 12-57 V |
| Number of DC inputs | 2 (DC jack, PoE-IN) |
| DC jack input Voltage | 12-57 V |
Ethernet
| Details | |
|---|---|
| 10/100/1000 Ethernet ports | 5 |
Fiber
| Details | |
|---|---|
| SFP ports | 1 |
Peripherals
| Details | |
|---|---|
| Number of USB ports | 1 |
| USB Power Reset | Yes |
| USB slot type | USB type A |
| Max USB current (A) | 1 |
Other
| Details | |
|---|---|
| PCB temperature monitor | Yes |
| Voltage Monitor | Yes |
Specifications
| Details | |
|---|---|
| Product code | RB450G |
| Architecture | MIPSBE |
| CPU | AR7161 |
| CPU core count | 1 |
| CPU nominal frequency | 680 MHz |
| License level | 5 |
| Operating System | RouterOS |
| Size of RAM | 256 MB |
| Storage size | 512 MB |
| Storage type | NAND |
| Tested ambient temperature | -20°C .. +70°C tested |
Powering
| Details | |
|---|---|
| PoE in | Passive PoE |
| PoE in input Voltage | 8-28 V |
| Number of DC inputs | 2 (DC jack, PoE-IN) |
| DC jack input Voltage | 8-28 V |
Ethernet
| Details | |
|---|---|
| 10/100/1000 Ethernet ports | 5 |
Peripherals
| Details | |
|---|---|
| Memory card type | microSD |
| Memory Cards | 1 |
| Serial port | RS232 |
Other
| Details | |
|---|---|
| PCB temperature monitor | Yes |
| Voltage Monitor | Yes |
The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.
Important changes
No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.
100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
Specifications
| Details | |
|---|---|
| Product code | CCR1009-7G-1C-1S+ |
| Architecture | TILE |
| CPU | TLR4-00980CH-10CE-A3b |
| CPU core count | 9 |
| CPU nominal frequency | 1.2 GHz |
| Dimensions | 444x175x47mm |
| License level | 6 |
| Operating System | RouterOS |
| Size of RAM | 2 GB |
| Storage size | 128 MB |
| Storage type | NAND |
| Tested ambient temperature | -20C .. +60C |
Powering
| Details | |
|---|---|
| Max Power consumption | 34W |
| PoE in | Passive PoE |
| PoE in input Voltage | 15-57 V |
| Number of AC inputs | 2 |
| AC input range | 100-240 |
| Number of DC inputs | 1 (PoE-IN) |
Ethernet
| Details | |
|---|---|
| 10/100/1000 Ethernet ports | 7 |
| Ethernet Combo ports | 1 |
Fiber
| Details | |
|---|---|
| SFP+ ports | 1 |
Peripherals
| Details | |
|---|---|
| Number of SIM slots | 1 Smart card (Mini SIM) |
| Serial port | RS232 |
| Number of USB ports | 1 |
| USB Power Reset | Yes |
| USB slot type | microUSB type AB |
| Max USB current (A) | 1 |
Other
| Details | |
|---|---|
| CPU temperature monitor | Yes |
| Current Monitor | Yes |
| PCB temperature monitor | Yes |
| Voltage Monitor | Yes |
Superior print quality, higher reliability and durability, greater security – your photo ID cards will have all these qualities when you print and encode them with the affordable and versatile HDP5000 ID card printer and encoder.
- High Definition Printing® gives you superior print quality, even on smart cards with embedded electronics, for a more impressive public image.
- High reliability and durability lowers your total cost of ownership, and affordable pricing makes High Definition Card Printing available to practically any business.
- We back the HDP5000 ID card printer and encoder with a lifetime printhead warranty and three-year warranty on everything else.
- Versatile modular design permits change as your needs change. Dual card input hopper, dual-sided printing, single- or dual-sided lamination and card encoding technologies are all field-upgradeable features.
- Minimal training is required because of its simple design and intuitive operation. Cards, ribbons and overlaminates come in cartridges that load quickly and easily.
HDP5000 ID Card Printer & Encoder Key Features
Our enhanced HDP5000 ID card printer and encoder is feature-packed. Perfect for smart cards with embedded electronics, it reliably produces cards in High Definition with the highest image quality available. The HDP5000 ID card printer and encoder upgrades easily in the field, with additional modules.
- New optional dual card input hopper simplifies card handling and minimizes downtime.
- HID Global next-generation HDP platform enables faster print speed.
- Optional single-sided or simultaneous dual-sided lamination for higher card security--quickly.
- Dual-sided card printing option lets you double the print area available without manually reloading cards.
- Optional High Durable HDP Film offers greatly enhanced card durability.
- SmartScreen™ LCD Control Panel displays helpful status messages and prompts.
ZXP Series 3 Card Printer
Zebra’s ZXP Series 3™
the ZXP Series 3 is the most
The ZXP Series 3 offers vivid,
3 is simplified with an intuitive design, color touch points, and
The printer’s compact design makes it the right choice for tight work spaces. Smart card and magnetic stripe encoding options allow the ZXP Series 3 to meet the needs of a variety of markets and applications, including ID and access control cards as well as personalized gift, membership and loyalty cards. Standard Kensington™ lock feature and optional enclosure lock make the ZXP Series 3 ideal for secure card printing solutions.
Print Touch
The ZXP Series 3 includes Zebra® Print Touch™, an embedded Near Field Communication (NFC) chip and software. Just hold your NFC enabled smartphone up to the Zebra Print Touch logo on the printer to read key printer information and launch
Genuine Zebra Supplies
Genuine Zebra supplies meet stringent quality standards and are recommended for optimal printing quality and proper printer performance.
CardStudio Software
Zebra’s CardStudio™ is an
ZXP Series 3 Specifications
PRINTER NAME
ZXP Series 3
STANDARD FEATURES
•True Colours® ix Series™ ZXP 3
•High capacity,
•ZRaster™
•Auto calibration of ribbon
•USB connectivity
•Microsoft® Certified Windows® drivers
•Print Touch NFC tag for online printer documentation and tools
•100 card covered feeder (30 mil)
•45 card capacity output hopper (30 mil)
•
•300 dpi (11.8 dots/mm) print resolution
•
•
•
•Kensington® secure lock slot
PRINTING SPECIFICATIONS
Full color or monochrome printing
Single- or
700cards / hour monochrome
195cards / hour
140cards / hour
MEDIA SPECIFICATIONS
NOTE: The ZXP Series 3 printer is designed to work only with Zebra True Colours ix Series
Zebra intelligent technology automatically detects and authenticates ribbon Integrated cleaning roller included with each ribbon
Media Starter Kit
True Colours ix Series ZXP 3 Ribbons
•YMCKO: 280 images/roll
•½ YMCKO: 400 images/roll
•YMCKOK: 230 images/roll
•KdO: 700 images/roll
•KrO: 700 images/roll
•Black Monochrome: 2000 images/roll
•Red Monochrome: 1700 images/roll
•Blue Monochrome: 1700 images/roll
•Gold Monochrome: 1600 images/roll
•Silver Monochrome: 1600 images/roll
•White Monochrome: 1400 images/roll
Card Compatibility
For optimum card quality and printer performance, use genuine Zebra card supplies. For more information, visit www.zebra.com/cards.
•Card Thickness:
•Card Size:
•Card Material: PVC and PVC composite
•Smart Card Contact — ISO
•Smart Card Contactless MIFARE® ISO 14443A/B
•Spot color or monochrome print only on < 20 mil card thickness
OPERATING CHARACTERISTICS
Environmental | Operating Temperature: 60ºF to 86ºF/15ºC to 30ºC |
| Operating Humidity: 20% to 65% |
| Storage Temperature: 23ºF to |
| Storage Humidity: 20% to 70% |
| Media Storage: |
| • Temperature: 41ºF to 77ºF/5ºC to 25ºC |
| • Humidity: 35% to 65% |
| • Do not store in direct sunlight |
|
|
Electrical | |
| Operating range: |
| Frequency range: |
| FCC Class A |
|
|
PHYSICAL CHARACTERISTICS
Length | 14.5" (368 mm) |
|
|
Height | 9.3" (236 mm) |
|
|
Width | 7.9" (200 mm) |
|
|
Weight | 11.6 lbs (5.3 kg) |
|
|
COMMUNICATION AND INTERFACE CAPABILITIES
USB V2.0 (cable included) — standard
SOFTWARE TOOLS
CardStudio card design and issuance software
Windows® XP (32 bit), Windows Vista® (32 and 64 bit), Windows Server® 2003 (32 bit), Windows 7® (32 and 64 bit), Windows Server 2008 (32 and 64 bit), Windows 8® and Win 8 Pro (32 and 64 bit), Windows Server 2012 (64 bit)
Please see www.zebra.com for up
OPTIONAL FEATURES
Manual card feeder bezel
Zebra OneCare extended product warranty programs
Lockable enclosure with opaque output bin*
Encoding Options and Specifications
•Magnetic stripe encoder — ISO 7811 (new and
•ISO 7816 smart card contact station for
•Combined MIFARE® ISO 14443 (13.56 MHz) contactless and ISO 7816 Contact Encoder with EMV level 1 certification and PC/SC compliance (includes 50 card capacity [30 mil] output hopper)*
•Encoding over USB and Ethernet
PRODUCT WARRANTY
The ZXP Series 3 is warranted against defects in workmanship and materials for a period of 2 (two) years from the date of shipment. For the complete warranty statement, please visit: www.zebra.com/warranty.
RECOMMENDED SERVICES
The Zebra OneCare Service portfolio of Essential, Select and Premier maximizes the availability and productivity of your devices. Key features include 24/7 technical support, comprehensive coverage, advance replacement and software updates. Optional Visibility Services are available. For more information go to www.zebra.com/zebraonecare.
For optimum print quality and printer performance, use genuine Zebra supplies. Specifications subject to change without notice.
*Field upgradeable options
Ideal for These Applications
Security
•Employee and student ID cards
•Access control cards
Retail / Hospitality
•Loyalty cards
•Gift cards
•Membership cards
Financial Services
•Instant issuance financial cards
- 1